Page 1 of 8 123 ... LastLast
Results 1 to 10 of 78

Thread: S.T.A.L.K.E.R.: Shadow of Chernobyl

  1. #1
    Join Date
    Nov 2005
    Location
    Arizona
    Posts
    1,529

    Arrow S.T.A.L.K.E.R. Shadow Of Chernobyl

    Here is a profile for S.T.A.L.K.E.R. Shadow Of Chernobyl that I made for the XBOX360 controller.

    ======================Notes========================

    This profile has some advanced commands that I think could use some explanation.

    1. The Inventory button will drop your currently held item if you press and hold it for 1/2 a second.

    2. The Cycle Weapon button will change your current held weapon depending on the number of times you tap the button. For example, your shotgun is normaly selected by pressing the 3 key on the keyboard. To select it with the gamepad, you would tap the Cycle Weapon button 3 times and then hold the button for 1/2 second on the 3rd press. Just remember that holding the button is what actualy selects the weapon.

    3. The crouch/Low Crouch(Hold) button works just like a normal crouch toggle when pressed normaly, but if you hold this button down for 1/2 a second while standing you will Low Crouch. This doesn't work if you are already crouched though.

    4. The Flashlight/Night Vision(Hold) button works just like a normal flashlight toggle when pressed normaly, but if you hold it for 1/2 second you will go to Night Vision. (This hasn't been fully tested)

    5. There are a few advanced commands that are in this profile that aren't part of the controller configuration but can be used if needed.
    (1). Crouch Cycle is a standard crouch toggle without the low crouch on hold.
    (2). Cycle Crouch(Advanced) is a crouch cycle that crouches on the first press than goes to low crouch on the second button press. The 3rd and fourth press brings you out of each of these commands in reverse order.
    (3). The Cycle Weapon cycle command should not be used. this command is reserved for use by a nother command.

    6. There are many commands assigned to buttons in this profile that are from the Hidden catagory. Be aware that if you modify this profile, you may not be able to restore it back the way it was without retrieving these commands . If you get into trouble, you can simply re-import this profile.
    ================================================

    Have fun
    Attached Images Attached Images
    Attached Files Attached Files

  2. #2
    Join Date
    Mar 2007
    Posts
    6
    I have a Logitech dual action gamepad so the analogues are layed out like the playstations dual shock.I just imported that PIN file and it works great,thanks,the only thing that it doesnt do for my controller is both analogues(because it is using the D-pad as the left analogue)

    Could anyone tell me how to edit the profile so that i can use both analgues?

    Thanks for your time

  3. #3
    Join Date
    Nov 2005
    Location
    Arizona
    Posts
    1,529
    you must have your joystick config setup wrong. go to the main screen where you select your game in pinnacle. Now from the top select prefferances, then device settings, then Advanced settings,now select show wizard and follow the instructions closely. also make sure you are using the latest beta 4.0 ver of pinnacle.

  4. #4
    Join Date
    Mar 2007
    Posts
    6
    Thanks for your help but to make things easier i just went out and exchanged the logitech for a wired 360 controller .The software supplied with the logitech was ridiculously complicated for me so the pinnacle profiler will be getting my money

  5. #5
    Join Date
    Mar 2007
    Posts
    21
    Yeah, Logitech makes great hardware but awful software, they should look into hiring the Pinnacle guys.

  6. #6
    Join Date
    Nov 2005
    Location
    Arizona
    Posts
    1,529
    if anyone gets a chance could they post if the night vision is working properly or not with this profile. thanks in advance.

  7. #7
    Join Date
    Mar 2007
    Posts
    7
    Nice one cid67 will give this a go tonight

  8. #8
    Join Date
    Apr 2007
    Posts
    2

    S.T.A.L.K.E.R. Shadow Of Chernobyl

    Hi, Cid's looks good but I didn't know about it so did my own.
    It's ana alernative. Hope it's useful!
    Attached Images Attached Images
    Attached Files Attached Files

  9. #9
    Join Date
    Apr 2007
    Posts
    2

    S.T.A.L.K.E.R. Shadow Of Chernobyl

    Forgot to mention about the above profile. With crouch - if u pull the trigger slightly you do the crouch and then if you hold it all the way down you do the Low Crouch. Also, how do you configure it so that if I hold the Flashlight Button, Night Vision comes on???

  10. #10
    Join Date
    Nov 2005
    Location
    Arizona
    Posts
    1,529
    That was actualy kinda tricky as i had to use a combination of a command with a hot-swap and a cycle command to make it work as i intended.In this way the flashlight will works as a standard toggle without there being a dead keypress do to not having a action being performed for the nightvision early on in the game.I still haven't got conformation that this is indeed working well, or at all for that matter.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •